Evaluation of Elastomeric Impression in Fixed Partial Denture-A Retrospective Analysis of Patient Records
Keywords:
Evolution, retrospective, patients, records.Abstract
The aim of this study is to evaluate defects in the impressions made for fixed partial denture prosthesis. For this, patient records of those who underwent replacement of missing teeth with fixed partial denture were collected. A total of 50 fixed partial denture impressions were evaluated. The data collection was done considering the following parameters - impression technique, number of prepared units, defect in the facial margin , defect or cut through finish lines, defect onto the axial wall, defect in material polymerisation, exposure of heavy body through wash material, retraction cord embedded in impression, air bubbles and voids, type of tray used, number of cords preferred. The collected data was tabulated in excel sheet. Statistical analysis was done in SPSS software. This study shows that 90% were double wash impressions, 10% were single wash impressions. About 36% showed defects on the facial margin, 62% showed defective cuts through the 360 degree flash, 38% defect on the axial wall, 38% showed air bubbles and voids. Majority of the impressions were made after packing two cords. Within the limit of the present study it is concluded that double wash impression technique is the most preferred. The voids and bubbles were the majority of the defects that were present than any other defects.
Downloads
References
Abdul Wahab, P. U. et al. (2017) ‘Risk Factors for Post-operative Infection Following Single Piece Osteotomy’, Journal of maxillofacial and oral surgery, 16(3), pp. 328–332.
Ajay, R. et al. (2017) ‘Effect of surface modifications on the retention of cement-retained implant crowns under fatigue loads: An In vitro study’, Journal of Pharmacy And Bioallied Sciences, p. 154. doi: 10.4103/jpbs.jpbs_146_17.
Al Hamad, K. Q. et al. (2008) ‘A clinical study on the effects of cordless and conventional retraction techniques on the gingival and periodontal health’, Journal of clinical periodontology, 35(12), pp. 1053– 1058.
Al-Quran, F. A., Al-Ghalayini, R. F. and Al-Zu’bi, B. N. (2011) ‘Single-tooth replacement: factors affecting different prosthetic treatment modalities’, BMC oral health, 11, p. 34.
Ashok, B. S., Ajith, T. A. and Sivanesan, S. (2017) ‘Hypoxia-inducible factors as neuroprotective agent in Alzheimer’s disease’, Clinical and experimental pharmacology & physiology, 44(3), pp. 327–334.
Ashok, V. et al. (2014) ‘Lip Bumper Prosthesis for an Acromegaly Patient: A Clinical Report’, The Journal of the Indian Prosthodontic Society, 14(Suppl 1), p. 279.
Ashok, V. and Suvitha, S. (2016) ‘Awareness of all ceramic restoration in rural population’, Research Journal of Pharmacy and Technology, 9(10), pp. 1691–1693.
Basha, F. Y. S., Ganapathy, D. and Venugopalan, S. (2018) ‘Oral Hygiene Status among Pregnant Women’, Research Journal of Pharmacy and Technology, 11(7), pp. 3099–3102.
Chee, W. W., Donovan, T. E. and Kahn, R. L. (1991) ‘Indirect inhibition of polymerization of a polyvinyl siloxane impression material: a case report’, Quintessence international , 22(2), pp. 133–135.
Dabas, N. et al. (2018) ‘Comparing two cordless impression techniques for dimensional accuracy: An in vitro study’, Indian Journal of Dental Sciences, 10(2), p. 61.
Danda, A. K. (2010) ‘Comparison of a single noncompression miniplate versus 2 noncompression miniplates in the treatment of mandibular angle fractures: a prospective, randomized clinical trial’, Journal of oral and maxillofacial surgery: official journal of the American Association of Oral and Maxillofacial Surgeons, 68(7), pp. 1565–1567.
Devi, V. S. and Gnanavel, B. K. (2014) ‘Properties of Concrete Manufactured Using Steel Slag’, Procedia Engineering, 97, pp. 95–104.
Duraisamy, R. et al. (2019) ‘Compatibility of Nonoriginal Abutments With Implants: Evaluation of Microgap at the Implant–Abutment Interface, With Original and Nonoriginal Abutments’, Implant dentistry, 28(3), p. 289.
Eapen, B. V., Baig, M. F. and Avinash, S. (2017) ‘An Assessment of the Incidence of Prolonged Postoperative Bleeding After Dental Extraction Among Patients on Uninterrupted Low Dose Aspirin Therapy and to Evaluate the Need to Stop Such Medication Prior to Dental Extractions’, Journal of maxillofacial and oral surgery, 16(1), pp. 48–52.
Ganapathy, D. (2016) ‘Effect of Resin Bonded Luting Agents Influencing Marginal Discrepancy in All Ceramic Complete Veneer Crowns’, JOURNAL OF CLINICAL AND DIAGNOSTIC RESEARCH. doi: 10.7860/jcdr/2016/21447.9028.
Ganapathy, D. and Visalakshi, R. M. (2019) ‘Retraction systems in fixed partial denture’, Drug Invention. Available at:
http://search.ebscohost.com/login.aspx?direct=true&profile=ehost&scope=site&authtype=crawler&jrnl=09 757619&AN=136927811&h=CTLX0pX4pnUHI1kb4AQvQwRM7k84j%2BwRkxpdSMXkh44sdQIKvwR YqHBP%2BPIPzcbw7SOMIU6RJlVyua4xAg1fGA%3D%3D&crl=c.
Gopalakannan, S., Senthilvelan, T. and Ranganathan, S. (2012) ‘Modeling and Optimization of EDM Process Parameters on Machining of Al 7075-B4C MMC Using RSM’, Procedia Engineering, 38, pp. 685– 690.
Govindaraju, L., Neelakantan, P. and Gutmann, J. L. (2017) ‘Effect of root canal irrigating solutions on the compressive strength of tricalcium silicate cements’, Clinical oral investigations, 21(2), pp. 567–571.
Grossmann, Y. and Sadan, A. (2005) ‘The prosthodontic concept of crown-to-root ratio: A review of the literature’, The Journal of prosthetic dentistry, 93(6), pp. 559–562.
Haim, M. et al. (2009) ‘Randomized controlled clinical study on the accuracy of two-stage putty-and-wash impression materials’, The International journal of prosthodontics, 22(3), pp. 296–302.
Jain, A. R. and Dhanraj, M. (2016) ‘A Clinical Review of Spacer Design for Conventional Complete Denture’, Biology and Medicine. doi: 10.4172/0974-8369.1000307.
Jain, A. R., Nallaswamy, D. and Ariga, P. (2019) ‘Determination of Correlation of Width of Maxillary Anterior Teeth with Extraoral Factor (Interpupillary Width) in Indian Population’, JOURNAL OF CLINICAL AND DIAGNOSTIC RESEARCH. doi: 10.7860/jcdr/2019/41082.12988.
Jeevanandan, G. and Govindaraju, L. (2018) ‘Clinical comparison of Kedo-S paediatric rotary files vs manual instrumentation for root canal preparation in primary molars: a double blinded randomised clinical trial’, European Archives of Paediatric Dentistry, pp. 273–278. doi: 10.1007/s40368-018-0356-6.
Jyothi, S. et al. (2017) ‘Periodontal Health Status of Three Different Groups Wearing Temporary Partial Denture’, Research Journal of Pharmacy and Technology, p. 4339. doi: 10.5958/0974-360x.2017.00795.8.
Kannan, A. and Others (2017) ‘Effect of Coated Surfaces influencing Screw Loosening in Implants: A Systematic Review and Meta-analysis’, WORLD , 8(6), pp. 496–502.
Kannan, A. and Venugopalan, S. (2018) ‘A systematic review on the effect of use of impregnated retraction cords on gingiva’, Research Journal of Pharmacy and Technology, 11(5), pp. 2121–2126.
Kavitha, M. et al. (2014) ‘Solution combustion synthesis and characterization of strontium substituted hydroxyapatite nanocrystals’, Powder Technology, 253, pp. 129–137.
LaForgia, A. (1967) ‘Cordless tissue retraction for impressions for fixed prosthesis’, The Journal of prosthetic dentistry, 17(4), pp. 379–386.
Lekha, L. et al. (2014a) ‘Schiff base complexes of rare earth metal ions: Synthesis, characterization and catalytic activity for the oxidation of aniline and substituted anilines’, Journal of organometallic chemistry, 753, pp. 72–80.
Lekha, L. et al. (2014b) ‘Synthesis, spectroscopic characterization and antibacterial studies of lanthanide(III) Schiff base complexes containing N, O donor atoms’, Journal of Molecular Structure, pp. 307–313. doi: 10.1016/j.molstruc.2013.10.014.
Levartovsky, S. et al. (2012) ‘Tissue displacement and impression techniques--part 1’, Refu’at ha-peh veha- shinayim , 29(3), pp. 19–27.
Livaditis, G. J. (1998) ‘Comparison of the new matrix system with traditional fixed prosthodontic impression procedures’, The Journal of Prosthetic Dentistry, pp. 200–207. doi: 10.1016/s0022- 3913(98)70216-1.
Malone, W. F. P., Tylman, S. D. and Koth, D. L. (1989) Tylman’s Theory and Practice of Fixed Prosthodontics. Ishiyaku EuroAmerica.
Marshak, B., Assif, D. and Pilo, R. (1990) ‘A controlled putty-wash impression technique’, The Journal of prosthetic dentistry, 64(6), pp. 635–636.
Menon, S. et al. (2018) ‘Selenium nanoparticles: A potent chemotherapeutic agent and an elucidation of its mechanism’, Colloids and surfaces. B, Biointerfaces, 170, pp. 280–292.
Messing, J. J. (1965) ‘Copper band technique’, British dental journal, 119(6), pp. 246–248.
Neelakantan, P. et al. (2015) ‘Antibiofilm activity of three irrigation protocols activated by ultrasonic, diode laser or Er:YAG laser in vitro’, International endodontic journal, 48(6), pp. 602–610.
Neelakantan, P. et al. (2015) ‘Influence of Irrigation Sequence on the Adhesion of Root Canal Sealers to Dentin: A Fourier Transform Infrared Spectroscopy and Push-out Bond Strength Analysis’, Journal of endodontia, 41(7), pp. 1108–1111.
Neelakantan, P., Grotra, D. and Sharma, S. (2013) ‘Retreatability of 2 mineral trioxide aggregate-based root canal sealers: a cone-beam computed tomography analysis’, Journal of endodontia, 39(7), pp. 893–896.
Parthasarathy, M. et al. (2016) ‘Effect of hydrogen on ethanol-biodiesel blend on performance and emission characteristics of a direct injection diesel engine’, Ecotoxicology and environmental safety, 134(Pt 2), pp. 433–439.
Patil, S. B. et al. (2017) ‘Comparison of Extended Nasolabial Flap Versus Buccal Fat Pad Graft in the Surgical Management of Oral Submucous Fibrosis: A Prospective Pilot Study’, Journal of maxillofacial and oral surgery, 16(3), pp. 312–321.
Phatale, S. et al. (2010) ‘Effect of retraction materials on gingival health: A histopathological study’, Journal of Indian Society of Periodontology, 14(1), pp. 35–39.
PradeepKumar, A. R. et al. (2016) ‘Diagnosis of Vertical Root Fractures in Restored Endodontically Treated Teeth: A Time-dependent Retrospective Cohort Study’, Journal of endodontia, 42(8), pp. 1175– 1180.
Praveen, K. et al. (2001) ‘Hypotensive anaesthesia and blood loss in orthognathic surgery: a clinical study’, The British journal of oral & maxillofacial surgery, 39(2), pp. 138–140.
Putchala, M. C. et al. (2013) ‘Ascorbic acid and its pro-oxidant activity as a therapy for tumours of oral cavity – A systematic review’, Archives of Oral Biology, pp. 563–574. doi: 10.1016/j.archoralbio.2013.01.016.
Rajendran, R. et al. (2019) ‘Comparative Evaluation of Remineralizing Potential of a Paste Containing Bioactive Glass and a Topical Cream Containing Casein Phosphopeptide-Amorphous Calcium Phosphate: An in Vitro Study’, Pesquisa Brasileira em Odontopediatria e Clínica Integrada, pp. 1–10. doi: 10.4034/pboci.2019.191.61.
Ranganathan, H., Ganapathy, D. M. and Jain, A. R. (2017) ‘Cervical and Incisal Marginal Discrepancy in Ceramic Laminate Veneering Materials: A SEM Analysis’, Contemporary clinical dentistry, 8(2), pp. 272– 278.
Sajan, D. et al. (2011) ‘Molecular structure and vibrational spectra of 2,6-bis(benzylidene)cyclohexanone: a density functional theoretical study’, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy, 78(1), pp. 113–121.
Selvan, S. R. and Ganapathy, D. (2016) ‘Efficacy of fifth generation cephalosporins against methicillin- resistant Staphylococcus aureus-A review’, Research Journal of Pharmacy and Technology, p. 1815. doi: 10.5958/0974-360x.2016.00369.3.
Sharma, R., Tiwari, H. and Singh, D. (2018) ‘Assessment of Complications Associated with Fixed Partial Denture-A Clinical Study’, Journal of Advanced Medical and Dental Sciences Research, 6(1). Available at: http://jamdsr.com/uploadfiles/32ComplicationsAssociatedwithFPDvol6issue1pp131- 134.20190307032200.pdf.
Shillingburg, H. T. and Sather, D. A. (2012) Fundamentals of Fixed Prosthodontics. Quintessence Pub.
Shrestha, P., Poudel, S. and Shrestha, K. (2015) ‘A clinical comparison of polyvinyl siloxane impressions for fixed partial dentures using three different techniques’, Journal of Advanced Medical and Dental Sciences Research, 3(2), p. 6.
Subasree, S., Murthykumar, K. and Dhanraj (2016) ‘Effect of Aloe Vera in Oral Health-A Review’, Research Journal of Pharmacy and Technology, p. 609. doi: 10.5958/0974-360x.2016.00116.5.
Subhashini, M. H. R., Abirami, G. and Jain, A. R. (2018) ‘Abutment selection in fixed partial denture-A review’, Drug Invention Today, 10(1). Available at: http://www.academia.edu/download/59480192/wassem_fixed_partial_denture20190601-60928- 1c18q50.pdf.
Sumeet, S. et al. (2014) ‘Abutment evaluation--A boon to success of fixed partial denture’, J Dent Herald, 1, pp. 38–42.
Uthrakumar, R. et al. (2010) ‘Bulk crystal growth and characterization of non-linear optical bisthiourea zinc chloride single crystal by unidirectional growth method’, Current applied physics: the official journal of the Korean Physical Society, 10(2), pp. 548–552.
Venugopalan, S. et al. (2014) ‘Case Report: Magnetically retained silicone facial prosthesis’, Nigerian journal of clinical practice, 17(2), pp. 260–264.
Vijayakumar, G. N. S. et al. (2010) ‘Synthesis of electrospun ZnO/CuO nanocomposite fibers and their dielectric and non-linear optic studies’, Journal of alloys and compounds, 507(1), pp. 225–229.
Vijayalakshmi, B. and Ganapathy, D. (2016) ‘Medical management of cellulitis’, Research Journal of Pharmacy and Technology, 9(11), pp. 2067–2070.
Vishnu Prasad, S. et al. (2018) ‘Report on oral health status and treatment needs of 5-15 years old children with sensory deficits in Chennai, India’, Special care in dentistry: official publication of the American Association of Hospital Dentists, the Academy of Dentistry for the Handicapped, and the American Society for Geriatric Dentistry, 38(1), pp. 58–59.
Wahab, P. U. A. et al. (2018) ‘Scalpel Versus Diathermy in Wound Healing After Mucosal Incisions: A Split-Mouth Study’, Journal of oral and maxillofacial surgery: official journal of the American Association of Oral and Maxillofacial Surgeons, 76(6), pp. 1160–1164.
Downloads
Published
How to Cite
Issue
Section
License
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
