Evaluation of Type of Impression Technique Used in Tooth Supported Full Mouth Rehabilitation - A Retrospective Study
Keywords:
Arch; Full Mouth Rehabilitation; Innovation technique, Types of impression material; Tooth Supported FMR; Two stage putty wash, innovationAbstract
The aim of this study was to retrospectively evaluate the type of impression technique used by various dental students. A total of 98 data entries were taken, duplicate and missing entries were omitted. So a total of 63 entries were evaluated. The data was collected from patient records in Saveetha Dental College, over a period of one year. . The evaluation was based on the type of impression technique used by various dental students. The results of the study were subjected to statistical analysis. Data analysis was done using SPSS software version 23.0. Chi- square test and frequency evaluation was done to evaluate the most frequently used impression technique in FMR. It was found that more than 92% of dental students preferred to use double stage putty wash technique with a (P-value - .743) The present study concluded that most of the dental students preferred to use double stage putty wash impression technique for their dental treatment
References
Abdul Wahab, P. U. et al. (2017) ‘Risk Factors for Post-operative Infection Following Single Piece Osteotomy’, Journal of maxillofacial and oral surgery, 16(3), pp. 328–332.
Ajay, R. et al. (2017) ‘Effect of surface modifications on the retention of cement-retained implant crowns under fatigue loads: An In vitro study’, Journal of Pharmacy And Bioallied Sciences, p. 154. doi: 10.4103/jpbs.jpbs_146_17.
Ariga, P. et al. (2018) ‘Determination of Correlation of Width of Maxillary Anterior Teeth using Extraoral and Intraoral Factors in Indian Population: A Systematic Review’, World Journal of Dentistry, pp. 68–75. doi: 10.5005/jp-journals-10015-1509.
Ashok, B. S., Ajith, T. A. and Sivanesan, S. (2017) ‘Hypoxia-inducible factors as neuroprotective agent in Alzheimer’s disease’, Clinical and experimental pharmacology & physiology, 44(3), pp. 327–334.
Ashok, V. et al. (2014) ‘Lip Bumper Prosthesis for an Acromegaly Patient: A Clinical Report’, The Journal of Indian Prosthodontic Society, pp. 279–282. doi: 10.1007/s13191-013-0339-6.
Ashok, V. and Suvitha, S. (2016) ‘Awareness of all ceramic restoration in rural population’, Research Journal of Pharmacy and Technology, 9(10), pp. 1691–1693.
Bader, F. and Setz, J. (1991) ‘[Wettability and accuracy of reproduction of impression materials]’, Deutsche zahnarztliche Zeitschrift, 46(5), pp. 346–348.
Balkenhol, M. et al. (2005) ‘Die Präzisionsabformung: materialimmanente und verfahrenstechnische Einflussfaktoren - Teil 2: Reißfestigkeit’, ZWR - Das Deutsche Zahnärzteblatt, pp. 93–97. doi: 10.1055/s- 2005-865278.
Basha, F. Y. S., Ganapathy, D. and Venugopalan, S. (2018) ‘Oral Hygiene Status among Pregnant Women’,
Research Journal of Pharmacy and Technology, p. 3099. doi: 10.5958/0974-360x.2018.00569.3.
Brown, D. (2004) ‘Materials for Impressions – 2003’, Dental Update, pp. 40–45. doi: 10.12968/denu.2004.31.1.40.
Danda, A. K. (2010) ‘Comparison of a single noncompression miniplate versus 2 noncompression miniplates in the treatment of mandibular angle fractures: a prospective, randomized clinical trial’, Journal of oral and maxillofacial surgery: official journal of the American Association of Oral and Maxillofacial Surgeons, 68(7), pp. 1565–1567.
Devi, V. S. and Gnanavel, B. K. (2014) ‘Properties of Concrete Manufactured Using Steel Slag’, Procedia Engineering, 97, pp. 95–104.
Duraisamy, R. et al. (2019) ‘Compatibility of Nonoriginal Abutments With Implants: Evaluation of Microgap at the Implant-Abutment Interface, With Original and Nonoriginal Abutments’, Implant dentistry, 28(3), pp. 289–295.
Eapen, B. V., Baig, M. F. and Avinash, S. (2017) ‘An Assessment of the Incidence of Prolonged Postoperative Bleeding After Dental Extraction Among Patients on Uninterrupted Low Dose Aspirin Therapy and to Evaluate the Need to Stop Such Medication Prior to Dental Extractions’, Journal of maxillofacial and oral surgery, 16(1), pp. 48–52.
Felton, D. A. et al. (1991) ‘Effect of in vivo crown margin discrepancies on periodontal health’, The Journal of Prosthetic Dentistry, pp. 357–364. doi: 10.1016/0022-3913(91)90225-l.
Ganapathy, D. et al. (2016) ‘Effect of Resin Bonded Luting Agents Influencing Marginal Discrepancy in All Ceramic Complete Veneer Crowns’, Journal of clinical and diagnostic research: JCDR, 10(12), pp. ZC67–ZC70.
Ganapathy, D. M., Kannan, A. and Venugopalan, S. (2017) ‘Effect of Coated Surfaces influencing Screw Loosening in Implants: A Systematic Review and Meta-analysis’, World Journal of Dentistry, pp. 496–502. doi: 10.5005/jp-journals-10015-1493.
Ghaznavi, G. (2016) ‘EXCIDA 56 th Exhibition and Congress of Iranian Dental Association May 17 - 20 , 2016 International Exhibition Center Tehran , Iran’, Dental News, pp. 54–61. doi: 10.12816/0030230.
Gopalakannan, S., Senthilvelan, T. and Ranganathan, S. (2012) ‘Modeling and Optimization of EDM Process Parameters on Machining of Al 7075-B4C MMC Using RSM’, Procedia Engineering, 38, pp. 685– 690.
Govindaraju, L., Neelakantan, P. and Gutmann, J. L. (2017) ‘Effect of root canal irrigating solutions on the compressive strength of tricalcium silicate cements’, Clinical oral investigations, 21(2), pp. 567–571.
Habib, A. N. and Shehata, M. T. (1995) ‘The effect of the type and technique used for impression making on the accuracy of elastomeric impression materials’, Egyptian dental journal, 41(4), pp. 1409–1416.
Hung, S. H. et al. (1990) ‘Marginal fit of porcelain-fused-to-metal and two types of ceramic crown’, The Journal of Prosthetic Dentistry, pp. 26–31. doi: 10.1016/0022-3913(90)90260-j.
Jacobs, M. S. and Stewart Windeler, A. (1991) ‘An investigation of dental luting cement solubility as a function of the marginal gap’, The Journal of Prosthetic Dentistry, pp. 436–442. doi: 10.1016/0022- 3913(91)90239-s.
Jain, A., Ranganathan, H. and Ganapathy, D. (2017) ‘Cervical and incisal marginal discrepancy in ceramic laminate veneering materials: A SEM analysis’, Contemporary Clinical Dentistry, p. 272. doi: 10.4103/ccd.ccd_156_17.
Jalalian, E. and Aletaha, N. S. (2011) ‘The effect of two marginal designs (chamfer and shoulder) on the fracture resistance of all ceramic restorations, Inceram: An in vitro study’, Journal of Prosthodontic Research, pp. 121–125. doi: 10.1016/j.jpor.2010.04.006.
Jeevanandan, G. and Govindaraju, L. (2018) ‘Clinical comparison of Kedo-S paediatric rotary files vs manual instrumentation for root canal preparation in primary molars: a double blinded randomised clinical trial’, European Archives of Paediatric Dentistry, pp. 273–278. doi: 10.1007/s40368-018-0356-6.
Jyothi, S. et al. (2017) ‘Periodontal Health Status of Three Different Groups Wearing Temporary Partial Denture’, Research Journal of Pharmacy and Technology, p. 4339. doi: 10.5958/0974-360x.2017.00795.8.
Kannan, A. and Venugopalan, S. (2018) ‘A systematic review on the effect of use of impregnated retraction cords on gingiva’, Research Journal of Pharmacy and Technology, p. 2121. doi: 10.5958/0974- 360x.2018.00393.1.
Kavitha, M. et al. (2014) ‘Solution combustion synthesis and characterization of strontium substituted hydroxyapatite nanocrystals’, Powder Technology, 253, pp. 129–137.
Land, M. F. and Fujimoto, J. (1995) Contemporary Fixed Prosthodontics. Mosby Elsevier Health Science.
Lekha, L. et al. (2014a) ‘Schiff base complexes of rare earth metal ions: Synthesis, characterization and catalytic activity for the oxidation of aniline and substituted anilines’, Journal of organometallic chemistry, 753, pp. 72–80.
Lekha, L. et al. (2014b) ‘Synthesis, spectroscopic characterization and antibacterial studies of lanthanide(III) Schiff base complexes containing N, O donor atoms’, Journal of Molecular Structure, pp. 307–313. doi: 10.1016/j.molstruc.2013.10.014.
Luthardt, R. G. et al. (2006) ‘Qualitative computer aided evaluation of dental impressions in vivo’, Dental Materials, pp. 69–76. doi: 10.1016/j.dental.2005.02.015.
Mandikos, M. N. (1998) ‘Polyvinyl siloxane impression materials: An update on clinical use’, Australian Dental Journal, pp. 428–434. doi: 10.1111/j.1834-7819.1998.tb00204.x.
McLean, J. W. (1972) ‘Polycarboxylate cements. Five years’ experience in general practice’, British Dental Journal, pp. 9–15. doi: 10.1038/sj.bdj.4802795.
Menon, S. et al. (2018) ‘Selenium nanoparticles: A potent chemotherapeutic agent and an elucidation of its mechanism’, Colloids and surfaces. B, Biointerfaces, 170, pp. 280–292.
Myers, G. E. and Stockman, D. G. (1960) ‘Factors that affect the accuracy and dimensional stability of the mercaptan rubber-base impression materials’, The Journal of Prosthetic Dentistry, pp. 525–535. doi: 10.1016/0022-3913(60)90016-0.
Neelakantan, P. et al. (2015) ‘Antibiofilm activity of three irrigation protocols activated by ultrasonic, diode laser or Er:YAG laser in vitro’, International endodontic journal, 48(6), pp. 602–610.
Neelakantan, P. et al. (2015) ‘Influence of Irrigation Sequence on the Adhesion of Root Canal Sealers to Dentin: A Fourier Transform Infrared Spectroscopy and Push-out Bond Strength Analysis’, Journal of endodontia, 41(7), pp. 1108–1111.
Neelakantan, P., Grotra, D. and Sharma, S. (2013) ‘Retreatability of 2 mineral trioxide aggregate-based root canal sealers: a cone-beam computed tomography analysis’, Journal of endodontia, 39(7), pp. 893–896.
Pande, N. A. and Parkhedkar, R. D. (2012) ‘An Evaluation of Dimensional Accuracy of One-Step and Two- Step Impression Technique Using Addition Silicone Impression Material: An In Vitro Study’, The Journal of Indian Prosthodontic Society. doi: 10.1007/s13191-012-0182-1.
Parthasarathy, M. et al. (2016) ‘Effect of hydrogen on ethanol-biodiesel blend on performance and emission characteristics of a direct injection diesel engine’, Ecotoxicology and environmental safety, 134(Pt 2), pp. 433–439.
Patil, S. B. et al. (2017) ‘Comparison of Extended Nasolabial Flap Versus Buccal Fat Pad Graft in the Surgical Management of Oral Submucous Fibrosis: A Prospective Pilot Study’, Journal of maxillofacial and oral surgery, 16(3), pp. 312–321.
PradeepKumar, A. R. et al. (2016) ‘Diagnosis of Vertical Root Fractures in Restored Endodontically Treated Teeth: A Time-dependent Retrospective Cohort Study’, Journal of endodontia, 42(8), pp. 1175– 1180.
Praveen, K. et al. (2001) ‘Hypotensive anaesthesia and blood loss in orthognathic surgery: a clinical study’,
The British journal of oral & maxillofacial surgery, 39(2), pp. 138–140.
Putchala, M. C. et al. (2013) ‘Ascorbic acid and its pro-oxidant activity as a therapy for tumours of oral cavity – A systematic review’, Archives of Oral Biology, pp. 563–574. doi: 10.1016/j.archoralbio.2013.01.016.
Quaas, S., Rudolph, H. and Luthardt, R. G. (2007) ‘Direct mechanical data acquisition of dental impressions for the manufacturing of CAD/CAM restorations’, Journal of Dentistry, pp. 903–908. doi: 10.1016/j.jdent.2007.08.008.
Rajendran, R. et al. (2019) ‘Comparative Evaluation of Remineralizing Potential of a Paste Containing Bioactive Glass and a Topical Cream Containing Casein Phosphopeptide-Amorphous Calcium Phosphate: An in Vitro Study’, Pesquisa Brasileira em Odontopediatria e Clínica Integrada, pp. 1–10. doi: 10.4034/pboci.2019.191.61.
Reich, S. et al. (2008) ‘Marginal Fit of Heat-pressed vs CAD/CAM Processed All-ceramic Onlays Using a Milling Unit Prototype’, Operative Dentistry, pp. 644–650. doi: 10.2341/07-162.
Reisbick, M. H. and Matyas, J. (1975) ‘The accuracy of highly filled elastomeric impression materials’, The Journal of Prosthetic Dentistry, pp. 67–72. doi: 10.1016/s0022-3913(75)80148-x.
Rudolph, H. et al. (2013) ‘Randomized controlled clinical trial on the three-dimensional accuracy of fast-set impression materials’, Clinical Oral Investigations, pp. 1397–1406. doi: 10.1007/s00784-012-0823-0.
Sajan, D. et al. (2011) ‘Molecular structure and vibrational spectra of 2,6-bis(benzylidene)cyclohexanone: a density functional theoretical study’, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy, 78(1), pp. 113–121.
Saunders, W. P. et al. (1991) ‘Effect of impression tray design and impression technique upon the accuracy of stone casts produced from a putty-wash polyvinyl siloxane impression material’, Journal of Dentistry,
pp. 283–289. doi: 10.1016/0300-5712(91)90072-7.
Selvan, S. R. and Ganapathy, D. (2016) ‘Efficacy of fifth generation cephalosporins against methicillin- resistant Staphylococcus aureus-A review’, Research Journal of Pharmacy and Technology, p. 1815. doi: 10.5958/0974-360x.2016.00369.3.
Sorensen, J. A. (1990) ‘A standardized method for determination of crown margin fidelity’, The Journal of Prosthetic Dentistry, pp. 18–24. doi: 10.1016/0022-3913(90)90147-5.
Subasree, S., Murthykumar, K. and Dhanraj (2016) ‘Effect of Aloe Vera in Oral Health-A Review’,
Research Journal of Pharmacy and Technology, p. 609. doi: 10.5958/0974-360x.2016.00116.5.
Thongthammachat, S. et al. (2002) ‘Dimensional accuracy of dental casts: Influence of tray material, impression material, and time’, Journal of Prosthodontics, pp. 98–108. doi: 10.1053/jopr.2002.125192.
Tjan, A. H. L. et al. (1986) ‘Clinically oriented evaluation of the accuracy of commonly used impression materials’, The Journal of Prosthetic Dentistry, pp. 4–8. doi: 10.1016/0022-3913(86)90272-6.
Uthrakumar, R. et al. (2010) ‘Bulk crystal growth and characterization of non-linear optical bisthiourea zinc chloride single crystal by unidirectional growth method’, Current applied physics: the official journal of the Korean Physical Society, 10(2), pp. 548–552.
Venugopalan, S. et al. (2014) ‘Magnetically retained silicone facial prosthesis’, Nigerian journal of clinical practice, 17(2), pp. 260–264.
Vijayakumar, G. N. S. et al. (2010) ‘Synthesis of electrospun ZnO/CuO nanocomposite fibers and their dielectric and non-linear optic studies’, Journal of alloys and compounds, 507(1), pp. 225–229.
Vijayalakshmi, B. and Ganapathy, D. (2016) ‘Medical management of cellulitis’, Research Journal of Pharmacy and Technology, p. 2067. doi: 10.5958/0974-360x.2016.00422.4.
Vishnu Prasad, S. et al. (2018) ‘Report on oral health status and treatment needs of 5-15 years old children with sensory deficits in Chennai, India’, Special care in dentistry: official publication of the American Association of Hospital Dentists, the Academy of Dentistry for the Handicapped, and the American Society for Geriatric Dentistry, 38(1), pp. 58–59.
Wahab, P. U. A. et al. (2018) ‘Scalpel Versus Diathermy in Wound Healing After Mucosal Incisions: A Split-Mouth Study’, Journal of oral and maxillofacial surgery: official journal of the American Association of Oral and Maxillofacial Surgeons, 76(6), pp. 1160–1164.
Downloads
Published
How to Cite
Issue
Section
License
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
