Zirconia as A Core Material - A Literature Review
Keywords:
core, material, literatureAbstract
Teeth that have become severely compromised by decay, large failing restorations, or fracture most often require full-coverage crowns to restore them to their original form and function. A core buildup is a restoration placed in a badly broken down or grossly decayed tooth to restore the bulk of the coronal portion of the tooth. This facilitates the subsequent restoration by means of an indirect extra coronal restoration. The strength of the tooth can be enhanced with intracoronal support. It should have compressive strength to resist intraoral forces and flexural strength to prevent core dislodgement during function. It should also have sufficient flexural strength, biocompatibility, resistance to leakage of oral fluids at the core-tooth interface, ease of manipulation, and ability to bond to remaining tooth structure. The primary purpose of a core build- up is to replace enough missing tooth structure to permit the creation of ideal retention and resistance form in the crown preparation. Materials used for core restoration after endodontic treatment include amalgam, resin composites, zirconia to name a few. The aim of this review is to evaluate the use of zirconia as a core material by assessing the studies available in comparison to other core materials.
Downloads
References
Aboushelib, M., Kleverlaan, C. and Feilzer, A. (2006) ‘Microtensile bond strength of different components of core veneered all-ceramic restorationsPart II: Zirconia veneering ceramics’, Dental Materials, pp. 857– 863. doi: 10.1016/j.dental.2005.11.014.
Ahn, S.-G. and Sorensen, J. A. (2003) ‘Comparison of mechanical properties of various post and core materials’, J Korean Acad Prosthodont, 41(3), pp. 288–299.
Ali, S. A. M. et al. (2015) ‘Influence of Full Veneer Restoration on Fracture Resistance of Three Different Core Materials: An Invitro Study’, Journal of clinical and diagnostic research: JCDR, 9(9), pp. ZC12–5.
Arcoria, C. J. et al. (1989) ‘A comparative study of the bond strengths of amalgam and alloy?glass ionomer cores’, Journal of Oral Rehabilitation, pp. 301–307. doi: 10.1111/j.1365-2842.1989.tb01345.x.
Ban, S. (2008) ‘Reliability and properties of core materials for all-ceramic dental restorations’, The Japanese dental science review, 44(1), pp. 3–21.
Bass, E. V. (2002) ‘Cast post and core foundation for the badly broken down molar tooth’, Australian Dental Journal, pp. 57–62. doi: 10.1111/j.1834-7819.2002.tb00304.x.
Blatz, M. B. et al. (2004) ‘In vitro evaluation of shear bond strengths of resin to densely-sintered high- purity zirconium-oxide ceramic after long-term storage and thermal cycling’, The Journal of Prosthetic Dentistry, pp. 356–362. doi: 10.1016/j.prosdent.2004.02.001.
Bowen, R. L. (1963) ‘Properties of a silica-reinforced polymer for dental restorations’, The Journal of the American Dental Association, pp. 57–64. doi: 10.14219/jada.archive.1963.0010.
Bowen, R. L. (1964) ‘EFFECT OF PARTICLE SHAPE AND SIZE DISTRIBUTION IN A REINFORCED POLYMER’, Journal of the American Dental Association , 69, pp. 481–495.
Chandra, S. (2007) ‘Chapter-33 Restorations of Badly Decayed and Broken Down Teeth’, Textbook of Biochemistry for Dental Students, pp. 336–344. doi: 10.5005/jp/books/10896_33.
Chandrasekar, R. et al. (2020) ‘Development and validation of a formula for objective assessment of cervical vertebral bone age’, Progress in orthodontics, 21(1), p. 38.
Denry, I. (2013) ‘How and when does fabrication damage adversely affect the clinical performance of ceramic restorations?’, Dental materials: official publication of the Academy of Dental Materials, 29(1), pp. 85–96.
Denry, I. and Kelly, J. R. (2014) ‘Emerging ceramic-based materials for dentistry’, Journal of dental research, 93(12), pp. 1235–1242.
Deogade, S., Gupta, P. and Ariga, P. (2018) ‘Effect of monopoly-coating agent on the surface roughness of a tissue conditioner subjected to cleansing and disinfection: A Contact Profilometric In vitro study’, Contemporary Clinical Dentistry, p. 122. doi: 10.4103/ccd.ccd_112_18.
Dérand, P. and Dérand, T. (2000) ‘Bond strength of luting cements to zirconium oxide ceramics’, The International journal of prosthodontics, 13(2), pp. 131–135.
Dua, K. et al. (2019) ‘The potential of siRNA based drug delivery in respiratory disorders: Recent advances and progress’, Drug development research, 80(6), pp. 714–730.
Duraisamy, R. et al. (2019) ‘Compatibility of Nonoriginal Abutments With Implants: Evaluation of Microgap at the Implant-Abutment Interface, With Original and Nonoriginal Abutments’, Implant dentistry, 28(3), pp. 289–295.
Ezhilarasan, D. (2018) ‘Oxidative stress is bane in chronic liver diseases: Clinical and experimental perspective’, Arab journal of gastroenterology: the official publication of the Pan-Arab Association of Gastroenterology, 19(2), pp. 56–64.
Ezhilarasan, D., Apoorva, V. S. and Ashok Vardhan, N. (2019) ‘Syzygium cumini extract induced reactive oxygen species-mediated apoptosis in human oral squamous carcinoma cells’, Journal of oral pathology & medicine: official publication of the International Association of Oral Pathologists and the American Academy of Oral Pathology, 48(2), pp. 115–121.
Ezhilarasan, D., Sokal, E. and Najimi, M. (2018) ‘Hepatic fibrosis: It is time to go with hepatic stellate cell- specific therapeutic targets’, Hepatobiliary & pancreatic diseases international: HBPD INT, 17(3), pp. 192– 197.
Fawzi, M. B. et al. (1977) ‘Synchronized Crystal Dissolution Behavior for Tooth Enamel and Synthetic (NBS) Hydroxyapatite’, Journal of Dental Research, pp. 394–406. doi: 10.1177/00220345770560040701.
Frejlich, S. and Goodacre, C. J. (1992) ‘Eliminating coronal discoloration when cementing all-ceramic restorations over metal posts and cores’, The Journal of Prosthetic Dentistry, pp. 576–577. doi: 10.1016/0022-3913(92)90096-s.
Gardner, T. N. et al. (1992) ‘Acoustic microscope study of the elastic properties of fluorapatite and hydroxyapatite, tooth enamel and bone’, Journal of Biomechanics, pp. 1265–1277. doi: 10.1016/0021- 9290(92)90282-6.
Garg, N. and Garg, A. (2010) Textbook of Operative Dentistry. Boydell & Brewer Ltd.
Gheena, S. and Ezhilarasan, D. (2019) ‘Syringic acid triggers reactive oxygen species-mediated cytotoxicity in HepG2 cells’, Human & experimental toxicology, 38(6), pp. 694–702.
Giordano, R. A., Campbell, S. and Pober, R. (1994) ‘Flexural strength of feldspathic porcelain treated with ion exchange, overglaze, and polishing’, The Journal of Prosthetic Dentistry, pp. 468–472. doi: 10.1016/0022-3913(94)90184-8.
Going, R. E. et al. (1968) ‘The strength of dental amalgam as influenced by pins’, The Journal of the American Dental Association, pp. 1331–1334. doi: 10.14219/jada.archive.1968.0366.
Gomathi, A. C. et al. (2020) ‘Anticancer activity of silver nanoparticles synthesized using aqueous fruit shell extract of Tamarindus indica on MCF-7 human breast cancer cell line’, Journal of Drug Delivery Science and Technology, p. 101376. doi: 10.1016/j.jddst.2019.101376.
Gupta, A. et al. (2014) ‘A Comparison of Fracture Resistance of Endodontically Treated Teeth Restored With Bonded Partial Restorations and Full-Coverage Porcelain-Fused-to-Metal Crowns’, International Journal of Periodontics & Restorative Dentistry, pp. 405–411. doi: 10.11607/prd.1706.
Hirasawa T. (1965) ‘[Studies on the self-curing resin containing inorganic filler for dental restoration. 3. On the dimensional accuracy for dental materials]’, Iyo Kizai Kenkyujo hokoku. Reports of the Institute for Medical and Dental Engineering, Tokyo Medical and Dental University, 2(7), pp. 644–655.
Hirasawa, T. et al. (1983) ‘Materials Science’, Journal of Dental Research, pp. 28–31. doi: 10.1177/00220345830620010701.
Hormati, A. A. and Denehy, G. E. (1980) ‘Microleakage of pin-retained amalgam and composite resin bases’, The Journal of Prosthetic Dentistry, pp. 526–530. doi: 10.1016/0022-3913(80)90072-4.
Huysmans, M.-C. D. N. J. M., Marie-Charlotte D N J and van der Varst, P. G. T. (1995) ‘Mechanical longevity estimation model for post-and-core restorations’, Dental Materials, pp. 252–257. doi: 10.1016/0109-5641(95)80058-1.
Huysmans, M. C. D. N. J. M., M.C.D.N.J.M. Huysmans and Van der Varst, P. G. T. (1993) ‘Finite element analysis of quasistatic and fatigue failure of post and cores’, Journal of Dentistry, pp. 57–64. doi: 10.1016/0300-5712(93)90054-t.
Iftekhar, H. (2019) ‘Endodontic management of badly broken down tooth with radix entomolaris using the canal projection technique’, Journal of Oral Research and Review, p. 36. doi: 10.4103/jorr.jorr_4_19.
‘Indirect composite partial coverage crowns to restore anterior teeth’ (2005) Dental Abstracts, pp. 225–227. doi: 10.1016/s0011-8486(05)80177-3.
Janda, R. et al. (2003) ‘A new adhesive technology for all-ceramics’, Dental Materials, pp. 567–573. doi: 10.1016/s0109-5641(02)00106-9.
Jang, G. W. et al. (2011) ‘Fracture Strength and Mechanism of Dental Ceramic Crown with Zirconia Thickness’, Procedia Engineering, pp. 1556–1560. doi: 10.1016/j.proeng.2011.04.260.
Jayanthi, N. and Vinod, V. (2013) ‘Comparative Evaluation of Compressive Strength and Flexural Strength of Conventional Core Materials with Nanohybrid Composite Resin Core Material an in Vitro Study’, The Journal of Indian Prosthodontic Society. doi: 10.1007/s13191-012-0236-4.
Jeevanandan, G. and Govindaraju, L. (2018) ‘Clinical comparison of Kedo-S paediatric rotary files vs manual instrumentation for root canal preparation in primary molars: a double blinded randomised clinical trial’, European Archives of Paediatric Dentistry, pp. 273–278. doi: 10.1007/s40368-018-0356-6.
J, P. C. et al. (2018) ‘Prevalence and measurement of anterior loop of the mandibular canal using CBCT: A cross sectional study’, Clinical implant dentistry and related research, 20(4), pp. 531–534.
Kanninen, M. F. (1974) ‘An Analysis of Dynamic Crack Propagation and Arrest for a Material Having a Crack Speed Dependent Fracture Toughness’, Prospects of Fracture Mechanics, pp. 251–266. doi: 10.1007/978-94-010-2314-6_15.
Kawaguchi, Y., Yamade, Y. and Kishi, T. (1992) ‘FRACTURE TOUGHNESS OF CERAMICS WITH REGARD TO SLOW CRACK GROWTH IN CHEVRON-NOTCHED SPECIMEN’, Mechanical Behaviour of Materials VI, pp. 515–520. doi: 10.1016/b978-0-08-037890-9.50335-5.
Kern, M. and Wegner, S. M. (1998) ‘Bonding to zirconia ceramic: adhesion methods and their durability’, Dental Materials, pp. 64–71. doi: 10.1016/s0109-5641(98)00011-6.
Kim, M.-J. et al. (2013) ‘Degree of conversion of two dual-cured resin cements light-irradiated through zirconia ceramic disks’, The Journal of Advanced Prosthodontics, p. 464. doi: 10.4047/jap.2013.5.4.464.
Kosmač, T. et al. (2002) ‘Y-TZP Dental Posts with a Core for Aesthetic Restoration of Endodontically Treated Teeth - A Production Rationale’, Materials Science Forum, pp. 243–250. doi: 10.4028/www.scientific.net/msf.413.243.
Kovarik, R. E., Breeding, L. C. and Franklin Caughman, W. (1992) ‘Fatigue life of three core materials under simulated chewing conditions’, The Journal of Prosthetic Dentistry, pp. 584–590. doi: 10.1016/0022- 3913(92)90370-p.
Kumar, L., Pal, B. and Pujari, P. (2015) ‘An assessment of fracture resistance of three composite resin core build-up materials on three prefabricated non-metallic posts, cemented in endodontically treated teeth: anin vitrostudy’, PeerJ, p. e795. doi: 10.7717/peerj.795.
Kupiec, K. A. (1999) A Study of Composite Resin Polymerization Using Argon Laser Vs. Conventional Light for Orthodontic Bracket Placement.
Lee, Y.-K. and Bin, Y. (2016) ‘Translucency and color match with a shade guide of esthetic brackets with the aid of a spectroradiometer’, Dental Press Journal of Orthodontics, pp. 81–87. doi: 10.1590/2177- 6709.21.2.081-087.oar.
Levartovsky, S. et al. (1994) ‘A comparison of the diametral tensile strength, the flexural strength, and the compressive strength of two new core materials to a silver alloy-reinforced glass-inomer material’, The Journal of Prosthetic Dentistry, pp. 481–485. doi: 10.1016/0022-3913(94)90118-x.
Lin, G. S. S. et al. (2020) ‘Polymerization Shrinkage and Degree of Conversion of New Zirconia- Reinforced Rice Husk Nanohybrid Composite’, European journal of dentistry. doi: 10.1055/s-0040- 1713951.
Lucas, T. J. et al. (2015) ‘Effect of grain size on the monoclinic transformation, hardness, roughness, and modulus of aged partially stabilized zirconia’, Dental Materials, pp. 1487–1492. doi: 10.1016/j.dental.2015.09.014.
Mádi, L. M., Varga, L. and Mikó, T. (2017) ‘Examination of the Properties of Resin Bonded Core Mixtures’, Materials Science Forum, pp. 171–177. doi: 10.4028/www.scientific.net/msf.885.171.
Malli Sureshbabu, N. et al. (2019) ‘Concentrated Growth Factors as an Ingenious Biomaterial in Regeneration of Bony Defects after Periapical Surgery: A Report of Two Cases’, Case reports in dentistry, 2019, p. 7046203.
Mathew, M. G. et al. (2020) ‘Evaluation of adhesion of Streptococcus mutans, plaque accumulation on
zirconia and stainless steel crowns, and surrounding gingival inflammation in primary molars: Randomized controlled trial’, Clinical oral investigations, pp. 1–6.
Mehta, M. et al. (2019) ‘Oligonucleotide therapy: An emerging focus area for drug delivery in chronic inflammatory respiratory diseases’, Chemico-biological interactions, 308, pp. 206–215.
Menon, S. et al. (2018) ‘Selenium nanoparticles: A potent chemotherapeutic agent and an elucidation of its mechanism’, Colloids and Surfaces B: Biointerfaces, pp. 280–292. doi: 10.1016/j.colsurfb.2018.06.006.
Misra, D. N. and Bowen, R. L. (1977) ‘Sorption of Water by Filled-Resin Composites’, Journal of Dental Research, pp. 603–612. doi: 10.1177/00220345770560060801.
Mohapatra, M. et al. (2016) ‘Restoration of A Badly Broken Down Tooth with A Custom Cast Post’, Indian Journal of Dental Education, pp. 197–199. doi: 10.21088/ijde.0974.6099.9316.11.
Motlani, M., Jaiswal, P. and Jain, A. (2016) ‘Biological Restoration to Restore a Extensively Damaged Tooth: A Case Report’, International Journal of Medical Research Professionals. doi: 10.21276/ijmrp.2016.2.6.024.
Nagasawa, Y. et al. (2017) ‘Bond strength of ceramic to resin composite for core build-up’, Dental Materials, p. e58. doi: 10.1016/j.dental.2017.08.114.
Nalliah, R. (2015) ‘Peer Review #1 of “An assessment of fracture resistance of three composite resin core build-up materials on three prefabricated non-metallic posts, cemented in endodontically treated teeth: an in vitro study (v0.1)”’. doi: 10.7287/peerj.795v0.1/reviews/1.
Nathanson, D. et al. (2010) ‘Performance of zirconia based crowns and FPDs in prosthodontic practice’, Journal of dental research, 89(Spec Iss B). Available at: https://www.researchgate.net/profile/Stephen_Chu4/publication/266767363_Performance_of_Zirconia_Bas ed_Crowns_and_FPDs_in_Prosthodontic_Practice/links/575005e308aeb753e7b49e50/Performance-of- Zirconia-Based-Crowns-and-FPDs-in-Prosthodontic-Practice.pdf.
Ohlmann, B., Eiffler, C. and Rammelsberg, P. (2012) ‘Clinical performance of all-ceramic cantilever fixed dental prostheses: results of a 2-year randomized pilot study’, Quintessence international , 43(8), pp. 643– 648.
Oh, W.-S., Delong, R. and Anusavice, K. J. (2002) ‘Factors affecting enamel and ceramic wear: a literature review’, The Journal of prosthetic dentistry, 87(4), pp. 451–459.
Oliva, R. A. and Lowe, J. A. (1986) ‘Dimensional stability of composite used as a core material’, The Journal of Prosthetic Dentistry, pp. 554–561. doi: 10.1016/0022-3913(86)90421-x.
Oliva, R. A. and Lowe, J. A. (1987) ‘Dimensional stability of silver amalgam and composite used as core materials’, The Journal of prosthetic dentistry, 57(5), pp. 554–559.
Owen, T. A. and Barber, M. (2018) ‘Direct or indirect post crowns to restore compromised teeth: a review of the literature’, British Dental Journal, pp. 413–418. doi: 10.1038/sj.bdj.2018.218.
Panchal, V., Jeevanandan, G. and Subramanian, E. M. G. (2019) ‘Comparison of post-operative pain after root canal instrumentation with hand K-files, H-files and rotary Kedo-S files in primary teeth: a randomised clinical trial’, European archives of paediatric dentistry: official journal of the European Academy of Paediatric Dentistry, 20(5), pp. 467–472.
Park, Y.-J., Chae, K.-H. and Rawls, H. R. (1999) ‘Development of a new photoinitiation system for dental light-cure composite resins’, Dental Materials, pp. 120–127. doi: 10.1016/s0109-5641(99)00021-4.
Pc, J., Marimuthu, T. and Devadoss, P. (2018) ‘Prevalence and measurement of anterior loop of the mandibular canal using CBCT: A cross sectional study’, Clinical implant dentistry and related research. Available at: https://europepmc.org/article/med/29624863.
Pedalino, I. A. (2012) ‘Depth of Cure of New Flowable Composite Resins’. doi: 10.21236/ad1013159.
Peláez, J. et al. (2012) ‘A prospective evaluation of zirconia posterior fixed dental prostheses: three-year clinical results’, The Journal of prosthetic dentistry, 107(6), pp. 373–379.
Prabakar, J. et al. (2018) ‘Comparative Evaluation of Retention, Cariostatic Effect and Discoloration of Conventional and Hydrophilic Sealants - A Single Blinded Randomized Split Mouth Clinical Trial’, Contemporary clinical dentistry, 9(Suppl 2), pp. S233–S239.
Rajendran, R. et al. (2019) ‘Comparative Evaluation of Remineralizing Potential of a Paste Containing Bioactive Glass and a Topical Cream Containing Casein Phosphopeptide-Amorphous Calcium Phosphate: An in Vitro Study’, Pesquisa Brasileira em Odontopediatria e Clínica Integrada, pp. 1–10. doi: 10.4034/pboci.2019.191.61.
Rajeshkumar, S. et al. (2018) ‘Biosynthesis of zinc oxide nanoparticles usingMangifera indica leaves and evaluation of their antioxidant and cytotoxic properties in lung cancer (A549) cells’, Enzyme and microbial technology, 117, pp. 91–95.
Rajeshkumar, S. et al. (2019) ‘Antibacterial and antioxidant potential of biosynthesized copper nanoparticles mediated through Cissus arnotiana plant extract’, Journal of photochemistry and photobiology. B, Biology, 197, p. 111531.
Ramadurai, N. et al. (2019) ‘Effectiveness of 2% Articaine as an anesthetic agent in children: randomized
controlled trial’, Clinical oral investigations, 23(9), pp. 3543–3550.
Ramakrishnan, M., Dhanalakshmi, R. and Subramanian, E. M. G. (2019) ‘Survival rate of different fixed posterior space maintainers used in Paediatric Dentistry - A systematic review’, The Saudi dental journal, 31(2), pp. 165–172.
Ramesh, A. et al. (2018) ‘Comparative estimation of sulfiredoxin levels between chronic periodontitis and healthy patients - A case-control study’, Journal of periodontology, 89(10), pp. 1241–1248.
Reddy, S. et al. (2016) ‘Evaluation of occlusal fracture resistance of three different core materials using the Nayyar core technique’, Journal of International Society of Preventive and Community Dentistry, p. 40. doi: 10.4103/2231-0762.175410.
Reyes-Gasga, J. and Alcántara-Rodríguez, C. M. (2017) ‘Structural Analysis of the Human Tooth Enamel by Transmission Electron Microscopy’, Hydroxyapatite and Related Materials, pp. 295–304. doi: 10.1201/9780203751367-30.
R, H. et al. (2020) ‘CYP2 C9 polymorphism among patients with oral squamous cell carcinoma and its role in altering the metabolism of benzo[a]pyrene’, Oral Surgery, Oral Medicine, Oral Pathology and Oral Radiology, pp. 306–312. doi: 10.1016/j.oooo.2020.06.021.
Ritter, A. V., Ghaname, E. and Pimenta, L. A. (2013) ‘Dentin and Enamel Bond Strengths of Dual-Cure Composite Luting Agents Used With Dual-Cure Dental Adhesives’, Smile Dental Journal, pp. 48–48. doi: 10.12816/0001462.
Samuel, S. R. (2021) ‘Can 5-year-olds sensibly self-report the impact of developmental enamel defects on their quality of life?’, International journal of paediatric dentistry / the British Paedodontic Society [and] the International Association of Dentistry for Children, 31(2), pp. 285–286.
Samuel, S. R., Acharya, S. and Rao, J. C. (2020) ‘School Interventions-based Prevention of Early- Childhood Caries among 3-5-year-old children from very low socioeconomic status: Two-year randomized trial’, Journal of public health dentistry, 80(1), pp. 51–60.
Sato, H. et al. (2008) ‘Mechanical Properties of Dental Zirconia Ceramics Changed with Sandblasting and Heat Treatment’, Dental Materials Journal, pp. 408–414. doi: 10.4012/dmj.27.408.
Sax, C., Hämmerle, C. H. F. and Sailer, I. (2011) ‘10-year clinical outcomes of fixed dental prostheses with zirconia frameworks’, International journal of computerized dentistry, 14(3), pp. 183–202.
Saygılı, G. and Şahmalı, S. M. (2002) ‘Comparative study of the physical properties of core materials’, The International journal of periodontics & restorative dentistry, 22(4). Available at: http://search.ebscohost.com/login.aspx?direct=true&profile=ehost&scope=site&authtype=crawler&jrnl=01 987569&asa=Y&AN=36876816&h=shQeA9CExUdqt%2BgL2U%2FfmOaBytDqEzgPXU%2FdFkb%2Bo UhvP7hDCxyW%2BSFQmqdChpOb5pG1%2BMgRkxEWcvcd7M6D5g%3D%3D&crl=c.
Sharma, P. et al. (2019) ‘Emerging trends in the novel drug delivery approaches for the treatment of lung cancer’, Chemico-biological interactions, 309, p. 108720.
Simmons, J. J. (1990) ‘Silver-alloy powder and glass ionomer cement’, Journal of the American Dental Association , 120(1), pp. 49–52.
Sinha, H. N. (1992) ‘From Zircon to High Purity Zirconia for Ceramics’, Mineral Processing and Extractive Metallurgy Review, pp. 313–325. doi: 10.1080/08827509208952715.
Sorrentino, R. et al. (2012) ‘Five-year prospective clinical study of posterior three-unit zirconia-based fixed dental prostheses’, Clinical oral investigations, 16(3), pp. 977–985.
Sridharan, G. et al. (2019) ‘Evaluation of salivary metabolomics in oral leukoplakia and oral squamous cell carcinoma’, Journal of oral pathology & medicine: official publication of the International Association of Oral Pathologists and the American Academy of Oral Pathology, 48(4), pp. 299–306.
Stewardson, D., Shortall, A. and Marquis, P. (2012) ‘The Bond of Different Post Materials to a Resin Composite Cement and a Resin Composite Core Material’, Operative Dentistry, pp. E38–E49. doi: 10.2341/11-409-l.
Suksaphar, W. et al. (2017) ‘Survival rates against fracture of endodontically treated posterior teeth restored with full-coverage crowns or resin composite restorations: a systematic review’, Restorative Dentistry & Endodontics, p. 157. doi: 10.5395/rde.2017.42.3.157.
Tay, F. R. et al. (2003) ‘Factors contributing to the incompatibility between simplified-step adhesives and self-cured or dual-cured composites. Part II. Single-bottle, total-etch adhesive’, The journal of adhesive dentistry, 5(2), pp. 91–105.
Varghese, S. S., Ramesh, A. and Veeraiyan, D. N. (2019) ‘Blended Module-Based Teaching in Biostatistics and Research Methodology: A Retrospective Study with Postgraduate Dental Students’, Journal of dental education, 83(4), pp. 445–450.
Vijayashree Priyadharsini, J. (2019) ‘In silico validation of the non-antibiotic drugs acetaminophen and ibuprofen as antibacterial agents against red complex pathogens’, Journal of periodontology, 90(12), pp. 1441–1448.
Vijayashree Priyadharsini, J., Smiline Girija, A. S. and Paramasivam, A. (2018) ‘In silico analysis of
virulence genes in an emerging dental pathogen A. baumannii and related species’, Archives of oral biology, 94, pp. 93–98.
Vishnu Prasad, S. et al. (2018) ‘Report on oral health status and treatment needs of 5-15 years old children with sensory deficits in Chennai, India’, Special care in dentistry: official publication of the American Association of Hospital Dentists, the Academy of Dentistry for the Handicapped, and the American Society for Geriatric Dentistry, 38(1), pp. 58–59.
Wahab, P. U. A. et al. (2018) ‘Scalpel Versus Diathermy in Wound Healing After Mucosal Incisions: A Split-Mouth Study’, Journal of oral and maxillofacial surgery: official journal of the American Association of Oral and Maxillofacial Surgeons, 76(6), pp. 1160–1164.
Yadav, A., Kumar, L. and Gupta, R. (2012) ‘A Systematic Approach to Restore Grossly Decayed Multirooted Teeth: Split Cast Post and Core’, International Journal of Prosthodontics and Restorative Dentistry, pp. 16–18. doi: 10.5005/jp-journals-10019-1040.
Yavirach, P. et al. (2009) ‘Effects of plasma treatment on the shear bond strength between fiber-reinforced composite posts and resin composite for core build-up’, Dental Materials Journal, pp. 686–682. doi: 10.4012/dmj.28.686.
Yilmaz, H., Aydin, C. and Gul, B. E. (2007) ‘Flexural strength and fracture toughness of dental core ceramics’, The Journal of prosthetic dentistry, 98(2), pp. 120–128.
Yüzügüllü, B. et al. (2008) ‘Diametral Tensile and Compressive Strengths of Several Types of Core Materials’, Journal of Prosthodontics, pp. 102–107. doi: 10.1111/j.1532-849x.2007.00269.x.
Zhang, Y. (2014) ‘Making yttria-stabilized tetragonal zirconia translucent’, Dental Materials, pp. 1195– 1203. doi: 10.1016/j.dental.2014.08.375.
Downloads
Published
How to Cite
Issue
Section
License
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
